Narwheel Classic Thru Axle Wheel Holder
Narwheel Classic Thru Axle Wheel Holder
Narwheel Classic Thru Axle Wheel Holder
Narwheel Classic Thru Axle Wheel Holder
Narwheel Classic Thru Axle Wheel Holder
Narwheel Classic Thru Axle Wheel Holder
Narwheel Classic Thru Axle Wheel Holder
Narwheel Classic Thru Axle Wheel Holder
  • Load image into Gallery viewer, Narwheel Classic Thru Axle Wheel Holder
  • Load image into Gallery viewer, Narwheel Classic Thru Axle Wheel Holder
  • Load image into Gallery viewer, Narwheel Classic Thru Axle Wheel Holder
  • Load image into Gallery viewer, Narwheel Classic Thru Axle Wheel Holder
  • Load image into Gallery viewer, Narwheel Classic Thru Axle Wheel Holder
  • Load image into Gallery viewer, Narwheel Classic Thru Axle Wheel Holder
  • Load image into Gallery viewer, Narwheel Classic Thru Axle Wheel Holder
  • Load image into Gallery viewer, Narwheel Classic Thru Axle Wheel Holder

Narwheel Classic Thru Axle Wheel Holder

Vendor
Terske
Regular price
$35.97
Sale price
$35.97
Regular price
$44.95
Sold out
Unit price
per 

Wall-Mount Wheel Holder
for Van, Truck, Shop, and Workshop Use

Updated version 2 with expanded compatibility
see table for details

The Narwheel Thru Axle Mount was made to securely hold thru axle front wheels in our workshop and while seeking out new trails in our campervan- but it works every bit as well in workshops, retail spaces, and demo trailers.

The Narwheel is CNC machined from 6061 aluminum and features a stepped stub axle and wingnut that will accommodate several sizes of front and/or rear hubs (see compatibility list)

The axle is mounted at a slight angle to allow some overlap with narrower tires yet keeps even 27.5 x 3.0in knobbies from contacting the mounting surface.  The three-inch, four-bolt square base plate can be mounted to walls or posts (you supply appropriate hardware) at any orientation that works for you.

Please use your best judgement when mounting!  We can't control or evaluate the surface you choose to mount these to or the suitability of the hardware you select, so take care when mounting in vehicles or where a falling wheel might injure someone.  The Narwheel is not designed for outdoor or exterior vehicle use.

Compatibility

Hub Size Description Short Short v2 Long v2
12x100mm Road Standard Front Preferred Preferred Compatible
12x110mm E-road Front Not Compatible Preferred Compatible
15x100mm Mountain Standard Front Preferred Preferred Compatible
15x110mm Mountain Boost Front Preferred Preferred Compatible
15x150mm Fat Bike Front Not Compatible Not Compatible Preferred
20x100mm DH Front
(obsolete)
Not Compatible Not Compatible Not Compatible
20x110mm DH Front
(obsolete)
Not Compatible Not Compatible Not Compatible
12x142mm Road & Non-Boost Rear Not Compatible Not Compatible Preferred
12x148mm Mountain Boost Rear Not Compatible Not Compatible Preferred
12x157mm Mountain Super Boost Rear Not Compatible Not Compatible Preferred
    • "Compatible" combinations will result in less-than-ideal exposed axle at hub end
    • Mounting holes will accept four #10 or M5 screws/bolts (not included). Mounting hardware and surface/anchor evaluation is the responsibility of the user.
    • For indoor use only.

Installation

  • Materials Required:
    •  Blue threadlocker (Loctite 242 or equivalent)
    •  19mm open-end wrench or torque wrench with 19mm crow's foot
    •  Mounting hardware as appropriate
    •  Mounting anchors as appropriate
  • Apply a drop of threadlocker to hex-end axle thread.
  • Hand-thread axle into base plate
  • Use 19mm wrench to torque axle to base plate with a force of 8-10Nm.
  • Mount to vertical surface using appropriate hardware and anchors
    •  Ceiling mounting is not recommended. Especially where the wheel or mount could fall and hurt someone.
    •  Take care to ensure that there is enough space to mount your largest anticipated wheel/tire combination to the mount.
  • Slide wheel hub over axle and appropriate shoulder
  • Thread nut onto axle and hand-tighten to approximately 6-8 Nm (as tight as—but not tighter than—you'd install a thru axle).
  • Re-check axle tightness every month or whenever play develops and re-tighten as needed.